Homeowner Resource
Plumbing & Septic Maintenance Guide
A practical homeowner maintenance schedule for drains, water heaters, water pressure, fixtures, sewer lines, and septic systems.
- CSLB #1087260
- Licensed & insured
- Flat-rate, quoted on site
- Free quotes
Monthly checks
- Look under sinks and around toilets for moisture.
- Listen for toilets that continue running after a flush.
- Check exposed supply hoses for corrosion, bulges, or cracking.
- Make sure slow drains are addressed before they become complete blockages.
Every six months
- Test the main water shutoff and accessible fixture stops.
- Clean faucet aerators and showerheads.
- Inspect the water heater area for rust, moisture, or unusual sounds.
- Confirm exterior drains remain clear before the rainy season.
Annual professional maintenance
- Test water pressure and confirm it remains below 80 PSI.
- Flush and inspect the water heater as the manufacturer recommends.
- Service tankless water heaters for scale and combustion condition.
- Inspect aging supply hoses and accessible piping.
- Review septic alarms, pumps, controls, and risers.
Septic tank service intervals and inspections
Many residential septic tanks need pumping every 3 to 5 years, but the correct interval depends on tank size, occupancy, usage, and system type. Advanced systems may require more frequent inspection or manufacturer-specific service.
Local · Licensed · Responsive
Call before a small issue grows
Recurring clogs, water-pressure changes, sewage odors, damp soil, unexplained water usage, or a water heater that behaves differently are all reasons to schedule an evaluation.
Flat-rate pricing, quoted on site before work begins.
CA CSLB #1087260 (C-36 Plumbing, C-42 Sanitation System)
Monday to Friday, 9:00 AM to 5:00 PM. Closed Saturday and Sunday